APPLICATION

Astek VG can be used in two or three layers depending on the surface conditions. First two layers shall be used to fill up the small holes and the third layer shall be the finish coat. The first layer shall be applied lengthwise and the second or the last layer should be applied breadthways. The application shall be done using a proper squeegee or a spray system.

		Min		Max
Astek VG		100 lt.		100 lt
80-100  thin silica sand		90 kg		110 kg
Water		44 lt		55 lt

The Application shall be done in following quantities:

Filling Layer: 1m2= 0.3lt.

Finish Coat: 1m2= 0.15lt.

 

ATTENTION!

ASTEK VG, shall be used at 14-35 degrees Celsius and should not be applied when rain is expected. The material should not be stored under direct sun light.

ASTEK VG, is specially produced for ASTEK in the U.S.A. and designed to meet all the requirement for sports playing surfaces. VG has a wide reference list of being used on many tennis courts and playing grounds.